All right, you guys I’m gonna, do a review, Armour vacuum-insulated hydration bottle! You can see. This is a 68 ounce or 2 liter. So this is basically hold one of those big jugs of soda that this stainless steel says here. It is I’d marked by thermal wall vacuum insulation per spot and lid with locking ring handle with integrated fence hooks, not for heart liquids and bpa-free, and it keeps liquids cool for 24 hours. So we see here here is a locking mechanism and opens up the lid.

The lid is spring-loaded I’m, not necessarily by a spring, but by this rubber gasket. It’s the same material or appears to be the same material as the gasket here, which keeps your liquids within the container defense hooks. Are these guys right here? You can see here pops right up. There’s two separates justments on those, so it clicks like a car door right here which gives 90 degrees for this crevice here and then one higher which gives you 90 degrees from this crevice.

Here very nice handle grips fairly. Well, you see, you got a nice little waffle pattern on the side and on the lid. What I liked about this bottle is it’s two and a half turns to close the lid. Here’s, the lid there’s the gasket, but also you actually have a stopper on the side, so you cannot over tighten the lid. This is great especially to over tighten your water bottles and you don’t want to muscle the lid off you’ll be safe, really, nice.

You can see some details here, perfect for hand grip, see here. Your thumb can easily be placed in that crevice there. Here’s some information on the bottom more about this water bottle- and here is the inside you see here, have instructions or information on the bottle, care and use guide, vacuum insulated, stainless steel, hydration bottle and opening this guy up. We see instructions on how to take care of the water bottle assembly in use, warnings and the limited warranty.

So this is on foreign information. I’m. Definitely take a read at this. I already have what they’re saying is every time you wash it. You want to take it completely apart, so you want to take this gasket out and they say pull it. This way, do not push it this way, even though that seems like a good place to put a pen or a pencil to you know to push this out, they say: take it out this way clean the gaskets make sure it’s actually. You know who you’re percent dry before you reassemble this.

You know clean it with warm soapy water, preferably detergents that won’t deteriorate the material eat away at the material or the finish the height of this guy. If you’re curious is oh and three-fourths, there we go. Here’s our measurements, laying down, took my camera off the tripod, and we can see here it’s about twelve and three-eighths, it’s a little crooked. It’s not the perfect measurement, but you can see here just if that will fit in your refrigerator or wherever you want to place.

This I think that would be a good. This is a good indicator. I want it to fit somewhere. You don’t want to ruin here. I can see here, I know some wear and tear that’s gonna happen is once I click this guy. There is gonna, be some contact there and right here this is gonna. Get some contact there when I’m curious about is how serious is the 68 full ounces? How much can I actually fit in this water bottle? So what I have is I actually have a blender in here, and we see we got 72 ounce and 64-ounce.

There’s 8 ounces in between. So if I fill it to this line here right above max, liquid I should have 68 ounce, so we’ll see how that holds up in this bottle. Let’s forgive this. For now. This is important. Information I will definitely keep. Let me fill up this with water all right now that we got that here’s our water. Here we go it’s right in between 72 ounces and 64 ounces, so that is 68 ounces. All right. Let’s open up this bottle, that’s one and a half one and a quarter turns- and we see here- it is completely empty.

I have not put anything in here yet, and we have our 68 ounces. Just like it states right here, let’s pour it in just how much water actually fit in here, wow that that is crazy right there, as you can see here, this is empty and let’s put the cap back on you. If you can’t see that the level is right there, it’s literally just right below this lip a couple millimeters, let’s put the lid on and see if there’s any overspill it catches on anything, there’s the lock and we’re good yeah.

That is literally 68 ounces right there. So, and you can see here it didn’t get on the lid at all. It didn’t get on the gasket you can you can you can really fill that up um, so yeah? This is the unboxing of the underarmor 68 ounce, also known as two liters vacuum insulated hydration bottle, I’m very excited for this water bottle, I bought it as I normally use a 22 ounce mountain bike bottle, which is my gym bottle in my school I use, bottle I, skateboard and I drink a lot of water when I skateboard much like other individuals, it’s a very cardio driven sport and the water refilling.

My water, with something other than this, can cause some stomach cramps, so I really needed a good water bottle. That’s you know that works for my body and this underarmour bottle. After some research just seemed like the most adorable, really practical, a good size. Nice styling I love the waffle cone on the side. You know this is a pretty simple design, but it’s also pretty modern and I like that. A big fan of Under Armour products, yeah! That’s why I got it on this.

Should last me, maybe two and a half three hours of skateboarding I’m gonna have to try that out, yeah so pick a lot of water. This seems like something that would be really really useful for you, oh yeah, for watching.