OutdoorСlip.com

OutdoorСlip.com

Gun Storage

23 Good Gun Storage – ATV/UTV Gun Storage & Mounts

Top 23

  Kolpin® KXP Boot Mount Kolpin® KXP Boottector Bracket Kolpin® Stronghold™ Latch Classic Accessories™ UTV Double-Gun Carrier Cabela's 52" TAC Gear UTV Double Gun Case Kolpin® Gun Boot® IV Loop Bracket Kolpin® UTV Gun Mount Kolpin® UTV Gun Boot Bed Mount Kolpin® Gun Boot® 6.0 Kolpin® KXP Gun Boot IV Bracket Kolpin® Rhino Grip Gun Mounts Kolpin KXP Ratcheting Rhino Grip Kolpin® Standard Gun Boot® 6.0 ATV Bracket Kolpin® Rhino Grip XL Gun Mounts Kolpin® Replacement Rubber Straps for Rhino Grips Kolpin® Utility Gear Rail System Double-Gun Boot® Mount Kolpin® Rhino Rack or Handlebar Gun Mount Kolpin® KXP Rhino Grips Kolpin® UTV Gun Carrier Great Day Sporting Clays UTV Gun Rack Kolpin® Rhino Grip Pro Great Day Power Ride-Rack Kolpin® KXP Plunger
 Kolpin® KXP Boot MountKolpin® KXP Boottector BracketKolpin® Stronghold™ LatchClassic Accessories™ UTV Double-Gun CarrierCabela's 52" TAC Gear UTV Double Gun CaseKolpin® Gun Boot® IV Loop BracketKolpin® UTV Gun MountKolpin® UTV Gun Boot Bed MountKolpin® Gun Boot® 6.0Kolpin® KXP Gun Boot IV BracketKolpin® Rhino Grip Gun MountsKolpin KXP Ratcheting Rhino GripKolpin® Standard Gun Boot® 6.0 ATV BracketKolpin® Rhino Grip XL Gun MountsKolpin® Replacement Rubber Straps for Rhino GripsKolpin® Utility Gear Rail System Double-Gun Boot® MountKolpin® Rhino Rack or Handlebar Gun MountKolpin® KXP Rhino GripsKolpin® UTV Gun CarrierGreat Day Sporting Clays UTV Gun RackKolpin® Rhino Grip ProGreat Day Power Ride-RackKolpin® KXP Plunger
Rating ★★★★★ ★★★★★ ★★★★★ ★★★★★ ★★★★★ ★★★★★ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★★☆ ★★★☆☆ ★★★☆☆ ★★★☆☆ ★★★☆☆---
Brand-KolpinKolpinCabela'sKolpinKolpinKolpinKolpinKolpin-KolpinKolpinKolpinKolpinKolpinKolpinKolpinKolpinCLASSICKolpinKolpinKolpinKolpin

Kolpin® KXP Boot Mount

  • Secures the Gun Boot Case to the bed of your Polaris Ranger
  • Allows for ample accessible bed space after installation
  • Does not interfere with rear visibility
  • Durable all-metal construction
  • The Kolpin KXP Boot Mount securely cradles your Gun Boot® Case (sold separately) in the bed of your Polaris® Ranger, while still allowing for plenty of accessible bed space. Mounting location will not interfere with rear visibility. Compatible with the Polaris Lock & Ride® system. Rugged metal construction stands up to abuse from the elements.


     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin® KXP Boottector Bracket

  • Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only
  • Lightweight, extremely durable and the compact design
  • Offers precision gun-angle adjustability
  • Fits Koplin Gun Boot IV and 6.0 models for quick and easy mounting with a KXP plunger included. Imported.
    Available: ATV Bracket, UTV Bracket.
    Apply now

    Kolpin® Stronghold™ Latch

  • Quickly attach your Kolpin Stronghold Gun Boot to your ride
  • High-impact, reinforced nylon and coated steel
  • Precise angle adjustment delivers a custom fit
  • Kolpin Stronghold Latches let you attach your Kolpin Stronghold Gun Boot to your ride. Ultrastrong, auto-latching design provides a quick and secure place for attachment. Rugged bracket is made of high-impact, reinforced nylon and coated steel. Precise angle adjustment delivers a customizable fit. Spring-loaded latch with stainless steel spring.
    Available: 
    • Auto Latch – Fits most ATV tubular racks and UTV beds or any flat, drillable surface. Compatible with Polaris composite ATV racks/UTV bed rails using the Polaris® Lock & Ride® system with two KXP plungers (sold separately). Includes U-bolts and universal mounting hardware.
    • UTV Auto Latch – Fits most UTV bed rails, roll cages or any flat, drillable surface. Compatible with Polaris composite UTV bed rails using the Polaris Lock & Ride® system with two KXP plungers (sold separately). Includes U-bolts and universal mounting hardware.
    • KXP Auto Latch – For use with Polaris-compatible UTV bed rails using the Polaris Lock & Ride system with two included KXP plungers.


     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Apply now

    Classic Accessories™ UTV Double-Gun Carrier

  • Heavy-duty straps with quick-release buckles attach to UTV's roll cage
  • Keeps two long guns secure, well protected and readily available
  • Thick-padded carrier fits one rifle or one shotgun on each side
  • Water-resistant backing and an abrasion-resistant coating
  • Classic Accessories' UTV Double-Gun Carrier keeps two long guns secure, well protected and readily available. Built with extra-thick padding, this carriers fits one rifle or one shotgun on each side. Heavy-duty straps and with quick-release buckle secure it to the UTV's roll cage. Water-resistant backing resists light rain and an exterior coating delivers maximum abrasion resistance. Fits Polaris, Yamaha and Kawasaki UTVs. Two-year manufacturer's warranty. Imported.
    Available:
    • Double Gun Black and Double Gun Next Camo® G1 Vista™ – Made of heavy-duty ProtekX6 fabric. Three large gear pockets. Bottom D-rings provide extra lash points. Fits: 53"L x 17"W x 4"H.
    • Deluxe Double Gun – Built of heavy-duty ProtekX Extreme™ fabric. Weather-resistant zippers. Two zippered front gear pockets. Two removable gun boots that fit rifles with scopes.  Webbing chains provide extra lash points. Fits: 56"L x 25"W x 4.75"H.


    Apply now

    Cabela's 52" TAC Gear UTV Double Gun Case

  • Holds up to two rifles or shotguns with scopes attached
  • MOLLE webbing on front for attaching accessories
  • Large accessory pouches
  • Integrated rain/dust cover included
  • A convenient place to store up to two rifles or shotguns plus extra ammo and other gear where it will stay protected. Cabela's 52” UTV Double Gun Case keeps your firearms out of the way and always within quick reach. Its spacious design safely and securely holds two shotguns, rifles or tactical rifles with 50mm scopes and bipods attached. MOLLE straps on the back for fast, easy attachment to your ATV/UTV rack pad or rear ATV luggage rack. MOLLE webbing on the front for attaching magazine pouches, pistol cases and other MOLLE-compatible accessories. Large accessory pouches for ammo, extra layers and other essential trail gear. Fits shotguns and rifles up to 52”. Includes an integrated rain/dust cover. Imported.
    Color/Camo pattern: Black, Cabela's Zonz™ Woodlands, TrueTimber® Kanati.
    Apply now

    Kolpin® Gun Boot® IV Loop Bracket

    Secure your Gun Boot IV or 6.0 cases to your ATV or UTV. Compact design efficiently makes use of the space on the rack. All-metal loop bracket can be adjusted to multiple angle positions between 0° and 45°. Rubber-coated ring holds case securely. Locking pin prevents movement and vibration when bouncing over rugged terrain. Universal-fit mounting system accommodates most ATV racks. Can also be mounted to the bedrail of a UTV or to any flat surface (drilling required).
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin® UTV Gun Mount

  • Rack adjusts from 27-1/2" to 35-1/2" and 45° in either direction
  • Easily mounts to flat floors or cargo beds of most UTVs and trucks
  • Quick access to shotguns or scoped rifles
  • Heavy-duty overmolded butt section firmly seats the firearm stock
  • Overmolded V-blocks with rubber straps grip the gun during travel
  • Safely secure your firearm when traveling to your hunting spot with Kolpin's floor mount UTV Gun Rack. This in-cab adjustable gun rack fastens to a flat mounting surface on the floor or cargo bed. It holds shotguns and scoped rifles, even covered in protective gun socks. Heavy-duty overmolded butt section firmly grips the firearm stock. Overmolded V-blocks with rubber straps ensure the gun stays in place while traversing rough terrain. Adjust rack height from 27-1/2” to 35-1/2” as needed and angle it so the barrel points in a safe direction. Teryx adapter plate allows mount to fit all Teryx models. Ranger adapter plate allows mount to fit 2010-current 400cc models, EV models and 2011-current 500cc models, while the UTV riser plate allows mount to fit 2004-2007 Yamaha Rhinos, 2008 and older Polaris Ranger XPs and 2009 and older Polaris Ranger Crews.
    6”L x 5.25”W.
    Available:
    • Kolpin Gun Mount
    • Teryx Adapter Plate
    • Ranger Adapter Plate
    • UTV Riser Plate



     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hi I'm tom lutz president and ceo of. Colton power sports let's join doug and jim as they take us through the features. And benefits of our utv gun rock we've. Seen with the evolution of utility vehicles and the shooting sports the need for more secure mounting of firearms inside the utility vehicle we've taken the existing product on the. Market and approved it adding more mounting capabilities for different utility vehicles a full molded base to. Securely mount the butt section of the firearm an adjustable stock for different length firearms plus a rubber. Over molded section to completely secure. Your firearm now I'll turn it over to jim to talk more about the features and benefits of the colton utv gun rack doug. Has explained to you all the features and benefits of our utility vehicle center gun rack here you can see it. Installed in this yamaha rhino using our optional center adapter plate also you. Can see how accessible the gun is and. How securely it's held with just one rubber strap that's innovation not. Imitation.

    Apply now

    Kolpin® UTV Gun Boot Bed Mount

    These secure, dependable metal brackets cradle two Koplin 6.0 Gun Boots (sold separately) for the ultimate in safe firearm transportation and provide quick and easy access to firearms. The sturdy powder-coated steel construction preventions vibration and movement over rough terrain. Compact design requires minimal bed space, leaving plenty of room for additional gear. In-bed mounting location will not interfere with rear visibility. Will not work on Mule 600/610.
    Size: Large/Wide bed width (min. 47.75"–max. 55").
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin® Gun Boot® 6.0

  • Dustproof and waterproof
  • Made with high-impact polypropylene shell
  • Will fit most shotguns and bolt-action rifles
  • Thick pile lining absorbs bumps and shock
  • Compatible with all ATV Gun Boot IV mounts
  • These dustproof, water-resistant and protective gun cases double as ATV or saddle scabbards. Made with a virtually indestructible, high-impact polypropylene shell for maximum protection and a 2-piece padded nylon sleeve to absorb bumps and shock that could throw off sight alignment. The hatchback design of the Gun Boot 6.0 provides easy access to rifles with scopes up to 50mm. Padded liner protects your firearm during transport. Will fit most shotguns and bolt-action rifles, including scoped rifles. Utilizes all ATV Gun Boot IV mounts, but will not fit UTV mounts. Streamlined profile for easy storage in tight spots, such as a bush plane or vehicle. Molded-in handle. Secure locking system seals tight and accepts padlock. Streamlined molded feet. ATV bracket not included. Black only.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hi I'm tom lutz president ceo of colton. Powers ports let's join doug and jim as they show us the unique features of the brand-new gun boot 6 the gun boot 6 fits. All existing a tv mounting brackets I'll. Take this loop bracket put it into the gear lock and load and slide the gun. Boot 6 into the mounting bracket the gun. Boot 6 was designed to accommodate larger optics and larger trigger areas. Of some of the new firearms the gun boot 6 is bar none the best way to transport. Your firearm for more features and benefits I'll turn it over to jim the. Kolpin gun boot 6 is the next generation gun boot from kolpin powersports its. Innovative design features a rear hatch back and permanent mounting of the rear. Lid additionally it's available and two. Versions the transport version that. Features a full case within a case and the impact version that has a split. Liner that stays attached with the gun. Boo both gun cases are airline approved. Copán powersports innovation not. Imitation.

    Apply now

    Kolpin® KXP Gun Boot IV Bracket

    Designed only for use with Gun Boot IV and Gun Boot 6.0 cases, this all-metal loop bracket adjusts from 0-45° for custom Gun Boot positioning. The rubber-coated loop rings securely hold your Gun Boot case. Locking pin prevents movement and vibration on rough terrain. Compact, custom-built base plate with built-in KXP mounting system. Compatible with Polaris® composite ATV racks that feature the Polaris Lock & Ride® System.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hi I'm tom lutz president ceo of colton. Power sports let's join doug and jim as they show us the unique features of the brand-new gun boot six the gun boot six fits all. Existing atv mounting brackets I'll take. This loop bracket put it into the gear lock and load and slide the gun boot six. Into the mounting bracket the gun boot. Six was designed to accommodate larger optics and larger trigger areas of some. Of the new firearms the gun boot six is. Bar none the best way to transport your firearm for more features and benefits. I'll turn it over to jim the Koppel gun. Boot six is the next generation gun boot. From colton powersports its innovative. Design features a rear hatchback and permanent mounting of the rear lid. Additionally, it's available and two. Versions the transport version that. Features a full case within a case and the impact version that has a split. Liner that stays attached with the gun. Boom both gun cases are airline approved. Copan powersports innovation not imitation.

    Apply now

    Kolpin® Rhino Grip Gun Mounts

  • Keep guns secure and sighted-in on rough trails
  • Vibration- and shock-reducing mount
  • Flexible static grips with rubber straps
  • All mounting hardware included
  • Great for tools and fishing equipment, too
  • Keep firearms, fishing rods, tools and other equipment secure and in place as you transport them on the roughest backcountry trails. Superior gripping power and cushioning support cradles your equipment, reducing side-to-side movement as strong, flexible static grips with rubber straps (not shown) hold it in place. Mount easily to existing tubular and composite racks on the front or back with included mounting hardware. The heavy-duty base on the UTV model provides multiple orientations to accommodate UTV roll bar diameters from 7/8" to 2". The heavy-duty base on the single and double models provide multple orientations to accomodate tube diameters from 5/8" -1.25". You can also mount it on any vertical or horizontal surface such as your UTV cargo bed or even a garage wall. The flexible grips are adjustable to tilt between 0° and 180° in 45° increments, and they're capable of holding equipment of various sizes and shapes. Per pair.
    Available: Single Gun, Double Gun, UTV.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin KXP Ratcheting Rhino Grip

    Go down the path or across the ice with ease of mind knowing your essential items are secure and readily available with Kolpin's KXP Ratcheting Rhino Grips. Cross-pattern rubber for superior cushion and gripping power for tools one to four inches in diameter. Kwik-clip design for easy field adjustments. Release button opens the grip quickly for instant access.
    Available: ATV, UTV, Grips.


     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Wanted to talk about these polaris. Ratcheting tool grips i bought these and. Put them on my 2016 rangers and i. Haven't i haven't had them on here more than well i got 80 89 miles on the. Rangers so i got them shortly after it. Was new haven't used it all that much. And I've just used them to you know. Carry shovels rakes and occasionally put. The weed eater in and things like that. Overall they work pretty good but a. Little disappointed in the quality as. You can see they ratchet and these grip. On the grips on the inside or rubber. And they do a really good job of. Pinching the shovel handle or whe your bar or anything that you put in there. And then they've got a button release on. Then they're spring-loaded you know so. Tighten it down this tight as you want and then release it but one of the. Things that i noticed with this already. Is that the spring mechanism inside it. Has broken if you as you can see that. That should be releasing like it. Did if you take it off there which you. Can remove this little clip there's a. Spring mechanism down in there and the. Pin and it looks like on this one that's came apart thunder warranty i mean they got a one-year warranty on the players accessories i think this stuff is made. By colton but they're plastic they're. You know they're not going to last forever i thought they would last more. Then a couple months, but we'll see what the next scent is maybe it's just a fluke that this one went bad. I ended up getting four of them they're not cheap they're about $89 a. Set you know so 45 bucks apiece for a. Plastic grip thing and you just think. They'd hold up a little better just thought I'd share in case anybody was. Looking at these like i said your mileage may vary with them, but they're. They're not that heavy-duty they. Work but i think you'd have to be careful with them to get much life out of them.

    Apply now

    Kolpin® Standard Gun Boot® 6.0 ATV Bracket

  • One-piece design has no moving parts for greater security
  • Pin lock holds the gun boot in place to eliminate vibration
  • Conveniently mounts quickly to either side of your ATV rack
  • Keep your Koplin Gun Boot secured to your ATV with the Kolpin Standard Gun Boot 6.0 ATV Bracket. The one-piece bracket is designed to handle the harshest rides from hunters that push their equipment to the limits. Metal-wire pin lock prevents excessive vibration so your rifle is ready to perform when the moment of truth arrives. Quickly and easily mounts to either side of your ATV rack. Angled for a perfect fit on medium- and small-sized ATVs. Rugged glass-infused nylon plastic construction. Compatible with the Koplin Gun Boot IV and Gun Boot 6.0 cases only.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin® Rhino Grip XL Gun Mounts

  • 360° rotation and customizable multiangle mounting
  • Bigger to hold padded gun cases and large tools
  • Outstanding gripping power and support
  • Static grips and durable rubber straps
  • All mounting hardware included
  • Adjusts without tools
  • These are the only gear grips on the market with 360° rotation and multiangle (45° or 90°) mounting capability that you can adjust without tools and custom configure to your application. 15% larger than the standard Rhino Grip size, these grips allow you to carry bigger tools and equipment, or bulkier items such as a soft padded gun case. Outstanding gripping power and cushioned support teams with strong, flexible static grips and durable rubber straps to hold items securely during transport over rough terrain. Mounting hardware included for easy attachment to tubular and composite racks on the front or back of your ATV.
    Available: Single Gun Model, Double Gun Model.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hey this jack with two brothers adventures today we're going to show you a rack system that we have for the atvs. Here this is the copan kxp rhino grip xl. And it's a very adjustable grip for. Tools guns a bows stuff like that so let. Me show you over here this is the mounting system for the polaris lock and. Ride system it comes with other mounting systems so if you have a different atv you can get it to mount on there as well basically for the rhino or for the. Polaris lock and ride it comes with a washer a compression sleeve and a bolt. So what you do to assemble this is you put the bolt through the compression sleeve where there's this little indentation here and then you put your. Washer on the top and you simply thread it in to the bottom of your grip now. What you're going to want to do is tighten this just a little bit to start compressing this because what you're going to do is when you put it into your hole is you're going to compress this and it's going to lock it really tight so to get it started you're gonna want to compress that just a little bit then. You want to choose the lock and ride hole but you're gonna mount that in. You're going to stick it down in there and then you're just gonna turn it to compress that rubber compression sleeve. Now the cool thing about this is that. It's just as easy to turn it out and. Take it out and put it into the next hole over if you decide that you're gonna you know it fit the tool better that way or you want to move locations on your rack so it's just that simple. It's in their rock solid it's not going anywhere so I'm gonna show you how some. Of the features on this one here this. These are very adjustable they rotate 360 degrees so the way you do that is. You simply pull this pin right here and. This is a quick clip and then it'll. Rotate wherever you want it to go it. Stops where you want it you simply slide. The pin back in. And it locks it into place so that it's not going to rotate on you anymore now. The other thing that this does is there's a little knob right here that. You can turn and this portion rotates it. Tilts from 0 to 180 degrees and 45. Degree increments so it has teeth where it locks in so there's the first 45. Degrees so as you can see that gives you a nice angled platform if you want to. Put something out and keep it away from something else on your rack or you can go on more down to the hundred eighty. Degree position and then that gives you. A nice solid mounting place out here. That's actually off of your rack in this instance and then it also goes the other. Way so it goes both ways so there's the. 45-degree indentation and then it'll go to the hundred eighty there or back up. To the zero this doesn't take any tools. As you see you just do it by hand with a quick clip or with the little thumb. Screw here and then the unit itself will. Hold anything from 3 to 4 of an inch up to two inches and has a nice little rubber. Retention strap here has a bunch of. Different places where you can put the retention strap and then you can put it over here any adjustment that you want to hold however big your device is it's. All coated in rubber this whole thing is rubber outside besides everything so it's not going to mark any of your tools or your guns or your equipment and then inside it has some nice soft rubber fins that's going to grip and cushion your thing from banging against the side of your the grip it's got a little it's got. A smaller opening up here to kind of. Help it from bouncing out or anything like that so i will put a tool in here. And you can see how this works kind of. Give you an idea. Keep my attention strap back on their so. We'll put a shovel in here drop it down. In right there simply put the retention. Strap there we can move this down here the greatest thing about this is its. Versatility because of its amount of. Adjustability there's just all kinds of adjust ability that you can do on this thing so there you go as you can see. That's nice and solid right there if i. Wanted to tilt this i can loosen both of. These and tilt it back and i could put. It off the back of my quad like this and. Then that's going to give me some wheel here to put a box on or to put something else on but the biggest advantage to. These is all the rubbers, so they don't mark they hold really tight, and they're. Very adjustable without tools all over. The rack all different angles all different adjust ability so if you're. Looking for something like this look at the copeland kxp rhino grip excels.

    Apply now

    Kolpin® Replacement Rubber Straps for Rhino Grips

    Ensure your gear remains safe and securely stored in your UTV gun rack with Kolpin's Replacement Rubber Straps for Rhino Grips. Includes two straps.


     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Kolpin® Utility Gear Rail System Double-Gun Boot® Mount

  • Gear Rail System includes double-Gun-Boot mount
  • Mounts on UTV roll bar
  • Cut-to-fit design
  • Maximize the unused space behind the seating on an UTV for storage of your firearms. Everything you need to mount 2 Gun Boot® Cases (sold separately) to the Utility Gear Rail System Item# 523477. Stationary rail system mounts on UTV roll bar and is made with heavy-duty, seven-gauge extruded anodized-black aluminum. Injection-molded mounts accommodate tubing sizes from 1.25"-2". Included gear rail bracket also allows universal mounting options for many Kolpin accessories. Compatible with Gun Boot IV and 6.0 cases.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Utility gear rail system. Colten is proud to introduce the only utility vehicle accessory that allows you to get more utility out of your. Utility vehicle the basis of the system is a durable and heavy-duty black. Powder-coated rail it can be cut to fit. Any utility vehicle with the roll bar of inch and a quarter two inches by simply. Sliding on the seat clamp and attaching. The highly engineered gear rail bracket you can now mount all of your kolp and bracket as accessories to your utv or tractor such as the fuel and water packs. The gear grips. Gun grip too dear lock and load. The gun boot 4 5 & 6. Bracket and the atv utv basket the innovative. Design of the Koppel utility gear rail system allows you to customize your utility vehicle or compact tractor for. Any task or adventure mount your gear. Quickly and easily without taking up that valuable bed space whether on the trail working outdoors or hunting the. Utility gear rail system lets you take your gear with you with the coal pan utility gear rail system the possibilities are as unlimited as your own imagination. You.

    Apply now

    Kolpin® Rhino Rack or Handlebar Gun Mount

    Allows you to use the Rhino grip XL on your handlebars. Also attaches to any tube rack where handlebar mounting space is limited. Grip removes from base without tools. Available for single gun mount only. Per pair.
    Apply now

    Kolpin® KXP Rhino Grips

  • Durable, flexible grips that cushion and protect
  • They rotate 360° and tilt 180° in 45° increments
  • Kwik clip design for in-field adjustments 
  • Convenient ease of use
  • Durable, flexible grips cushion and protect guns and tools in a secure cradle. They rotate 360° and tilt 180° in 45° increments. Kwik clip design for in-field adjustments and ease of use. Custom base plate incorporates KXP mounting system for Polaris® composite racks and Polaris Lock & Ride® System. Imported.
    Available: Single ATV Grip, Double ATV Grip, Single UTV Grip, Double UTV Grip.

    Hi this is scott with me up to go calm i. Am with jim weber from kolpin no jim we. Talked about the different rhino grips now i have a polaris atv can you explain. To me how i go about mounting the rhino. Trips to my players good question scott kolpin is the only company that offers a. Mount specific for the polaris lock and ride and what we have our xl. Rhino grip single here and it's made it. Has the lock and ride plunger you simply put it into the rack tighten it up. Insert the grip any way you want it. Secure it with the quick clip so no. Drilling no modification to your rack. Fits right on you can have them on and off literally in 10 seconds and that same system works with the multiple. Exactly this is a single this is. The kxp mount for the double grip same thing fits right on now we have the key. Xp version with the standard a tv which. Is the one-inch plunger fits into the rack or the utv which is an intend ant. Quarter by 4 inch and it fits into the bed rail of the rangers 2005 and newer now if you want to step it up a little. Bit and take our top-of-the-line ratcheting rhino grip we have the ratcheting rhino grip that fits on the same base available for you tv and a tv. Also again no drilling just put them in. Tighten them up insert the grip put the. Clip on and you're ready to go so the small one is for the atv and the larger one is for the utv exactly. Alright well that definitely clear some things up again you can find all the rhino grips at gear up to go calm.

    Apply now

    Kolpin® UTV Gun Carrier

  • Adjustable length fits most UTV frames
  • Foam padding protects and secures firearms
  • Rubber-coated ends protect the UTV frame from scratches
  • Assembles without tools
  • Your gun is ready at a moment's notice with Kolpin's UTV Gun Carrier. Adjustable from 20-1/2” to 28-1/2”, this versatile rack mounts to most UTV frames. Foam padding protects your firearms and keeps them secure while traveling over rough terrain. Rubber-coated ends protect the UTV frame from scratches. Assembles without tools.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hi I'm tom lutz president and ceo of. Colton power sports let's join doug and jim as they take us through the features. And benefits of our utv gun rock we've. Seen with the evolution of utility vehicles and the shooting sports the need for more secure mounting of firearms inside the utility vehicle we've taken the existing product on the. Market and approved it adding more mounting capabilities for different utility vehicles a full molded base to. Securely mount the butt section of the firearm an adjustable stock for different length firearms plus a rubber. Over molded section to completely secure. Your firearm now I'll turn it over to jim to talk more about the features and benefits of the colton utv gun rack doug. Has explained to you all the features and benefits of our utility vehicle center gun rack here you can see it. Installed in this yamaha rhino using our optional center adapter plate also you. Can see how accessible the gun is and. How securely it's held with just one rubber strap that's innovation not. Imitation.

    Apply now

    Great Day Sporting Clays UTV Gun Rack

  • Gun holders keep firearms pointed in a safe direction
  • Fit all popular UTVs with cargo beds
  • Cushioned gun clips conform to fit a wide range of firearms
  • Safely transport uo to four guns on the sporting clays range or to your favorite hunting spot with the Great Day Sporting Clays UTV Gun Rack. Gun holders are placed at an upward angle to keep firearms pointed in a safe direction. Moldable, cushioned gun clips can be set at different heights for a wide variety of firearms. Made of heavy-duty aircraft-grade aluminum. Some drilling required. All required hardware included. Made in USA.
    Wt: 8 lbs.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Apply now

    Kolpin® Rhino Grip Pro

  • Cast aluminum mounts coated with protective rubber overmolding
  • Rotate and tilt the mounts to custom-fit your gear
  • Universal mounts fit tubes 5/8" to 2"-dia. or flat surfaces
  • Kolpin's Rhino Grip Pro is their toughest universal mount yet. Cast aluminum mounts coated with protective rubber overmolding that absorbs shock and provides a secure grip. Rotate and tilt the mounts to custom-fit your gun, bow, ice auger or yard tools so you know the hold is strong. Universal mounts fit roll cages and racks with 5/8" to 2"-dia. tubes or flat, drillable surfaces. Includes rubber securing straps. Per 2.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hey this jack with two brothers adventures today we're going to show you a rack system that we have for the atvs. Here this is the copan kxp rhino grip xl. And it's a very adjustable grip for. Tools guns a bows stuff like that so let. Me show you over here this is the mounting system for the polaris lock and. Ride system it comes with other mounting systems so if you have a different atv you can get it to mount on there as well basically for the rhino or for the. Polaris lock and ride it comes with a washer a compression sleeve and a bolt. So what you do to assemble this is you put the bolt through the compression sleeve where there's this little indentation here and then you put your. Washer on the top and you simply thread it in to the bottom of your grip now. What you're going to want to do is tighten this just a little bit to start compressing this because what you're going to do is when you put it into your hole is you're going to compress this and it's going to lock it really tight so to get it started you're gonna want to compress that just a little bit then. You want to choose the lock and ride hole but you're gonna mount that in. You're going to stick it down in there and then you're just gonna turn it to compress that rubber compression sleeve. Now the cool thing about this is that. It's just as easy to turn it out and. Take it out and put it into the next hole over if you decide that you're gonna you know it fit the tool better that way or you want to move locations on your rack so it's just that simple. It's in their rock solid it's not going anywhere so I'm gonna show you how some. Of the features on this one here this. These are very adjustable they rotate 360 degrees so the way you do that is. You simply pull this pin right here and. This is a quick clip and then it'll. Rotate wherever you want it to go it. Stops where you want it you simply slide. The pin back in. And it locks it into place so that it's not going to rotate on you anymore now. The other thing that this does is there's a little knob right here that. You can turn and this portion rotates it. Tilts from 0 to 180 degrees and 45. Degree increments so it has teeth where it locks in so there's the first 45. Degrees so as you can see that gives you a nice angled platform if you want to. Put something out and keep it away from something else on your rack or you can go on more down to the hundred eighty. Degree position and then that gives you. A nice solid mounting place out here. That's actually off of your rack in this instance and then it also goes the other. Way so it goes both ways so there's the. 45-degree indentation and then it'll go to the hundred eighty there or back up. To the zero this doesn't take any tools. As you see you just do it by hand with a quick clip or with the little thumb. Screw here and then the unit itself will. Hold anything from 3 to 4 of an inch up to two inches and has a nice little rubber. Retention strap here has a bunch of. Different places where you can put the retention strap and then you can put it over here any adjustment that you want to hold however big your device is it's. All coated in rubber this whole thing is rubber outside besides everything so it's not going to mark any of your tools or your guns or your equipment and then inside it has some nice soft rubber fins that's going to grip and cushion your thing from banging against the side of your the grip it's got a little it's got. A smaller opening up here to kind of. Help it from bouncing out or anything like that so i will put a tool in here. And you can see how this works kind of. Give you an idea. Keep my attention strap back on their so. We'll put a shovel in here drop it down. In right there simply put the retention. Strap there we can move this down here the greatest thing about this is its. Versatility because of its amount of. Adjustability there's just all kinds of adjust ability that you can do on this thing so there you go as you can see. That's nice and solid right there if i. Wanted to tilt this i can loosen both of. These and tilt it back and i could put. It off the back of my quad like this and. Then that's going to give me some wheel here to put a box on or to put something else on but the biggest advantage to. These is all the rubbers, so they don't mark they hold really tight, and they're. Very adjustable without tools all over. The rack all different angles all different adjust ability so if you're. Looking for something like this look at the copeland kxp rhino grip excels.

    Apply now

    Great Day Power Ride-Rack

    Perfect for your custom cart, the Great Day Power-Ride Rack is the solution to properly and safely transporting your firearms or bows to your hunting spot. The Power-Ride Rack can be positioned to either the inside or outside of your vehicle's frame. Featuring the Slide-Lock mounting system, which allows solid installation in seconds with no tools needed. Soft gun clips have adjustable, stretch holding straps to ensure secure transport over the toughest terrain. Constructed of aircraft aluminum with a hard powder-coat paint finish. Works on all carts with a rack mounting width from 36" to 50". Made in USA.
    Available: Power-Ride Gun Rack, Power-Ride Bow Rack.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    The power ride gun rack allows you to transport to firearms safe secure and. Out of the way the power ride gun rack. Mounts snugly at the back of the utv cab. And holds two guns in protective super soft cradles with velcro retainer straps. The power ride gun rack is designed to. Attach to your tv frames measuring 50 to. 64 inches wide with a turn of two wings. Knobs the power ride can be installed or. Removed in just seconds the power ride. Gun rack is framed in super-strong aircraft aluminum four years of long-lasting dependable service and it's. Another quality product from great day.

    Apply now

    Kolpin® KXP Plunger

    Outfit your Polaris® composite racks with a few plungers to quickly and easily accept KXP accessories. Expanding design for added security. Ergonomic construction with brass insert. Compatible with Polaris composite ATV/UTV racks and the Polaris Lock & Ride® System. Tool-free installation. Imported. Per Each.
    Available: UTV Plunger, ATV Plunger.
     Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hey folks justin from colton today i. Want to talk to you a little bit about the new kxp system that now allows kolp. And accessories to attach quickly and easily to the players utv or your polaris atv let's take a look at the new. Grips for the k xp system to work simply. Slide the plunger system into the lock and load on the bed rail compress and you're good to go to remove the k xp system from the bed rail simply deactivate the plunger system remove from the gear lock and. Load and you're off so now let's take a. Closer look at the rapidly growing a lineup of kxp items on this machine we. Have the kxp ratcheting rhino grip the. Rhino grip features an x pattern in the. Rubber overmold which allows for better cushioning effects on your most delicate items simply place the object in the. Grips perhaps you too close lock it in. And that will secure your atv to remove. The item simply push the button on the back side opens the grip and remove your. Item. So here i have the kxp fuel pack bracket. Simply attach the lock and load rail and now you can quickly and easily attach your fuel packs here's the junior remove. It also accepts the four gallon system. Now it's just quick and easy to remove. Play it off remove the bracket and. You're off to your next adventure here i. Have the kxp boot ector bracket again simply attach the lock and ride rail activate the system and then insert your. Gun boot into the bracket and you're off. To your hunting trip showing here i have. The kxp gun boot 5 brackets works the. Same way simply attach the lock and ride rail activate the plunger system and. Attach your gun root 5 and secure with. The with the turn now what i have. Here is the new kxp bull boot bracket again simply drop into. The lock and ride system compress. Activate the k xp system simply take. Your bow boot set in the bracket slide. Forward pin in four locations and off. You go.

    Apply now
    Hi! Welcome to my review project dedicated to outdoor activity. I have great experience in hiking, camping, and fishing. I'm ready to share it with you. Hope it will be useful for you.