Hello, everybody welcome back to the world of me. My name is cougar, and this is another episode from the Amazon review series. We got another request in and just so happens it’s from a previous company. It is from ex agus and they they contacted us- and let us know that the previous item that they gave us the previous by pod- they actually upgraded and got a new variation on it.

So, let’s go ahead and open up the box here, find out what’s inside and kind of go over, what’s new about it, what you know what makes this a little bit better than maybe the last one, alright guys! Well, here we go here. It is right here and it is another bipod now this one is, it is the identical build in terms of the way that it works. It still has the the spring assembly here that locks it into the up or down position as well.

It does have the extendable legs that extend out from 6 to 9 inches there and they lock into place using these little these little recesses here you just use the the little button right there and slide it back in. There is a little spring right there. That’s what causes it to kind of shoot out like that. You can then, of course, adjust it to whatever length you want.

Those are roughly 1/2 inch increments, and then you can take and lock it all the way up, nice and tight. It does come with an adapter. Now this adapter is for a Piketty rail and/or, a pic rail I call it it comes where you can mount it to the the rail there. It does come with a wrench, and then you have this little piece down here which simulates the swivel on a on a rifle stock for the sling.

So you know you can take put this on not only something that has a pic rail, but on something more like a traditional hunting rifle that may not have that, but could have the the simple swivel piece now how that works is right. Here is where your stock would end up, going or the hand grip more so, and there is this section right here now you can see there is a little cross piece right there and that’s actually removable that cross piece.

Is there just kind of keep tension on on these other two pieces here that do fit down they fit down here they go into this little opening at the bottom, and then they attach down here at the bottom, where you have this kind of pivot pin here and then you have this tensioner, and this tensioner is what you use to tighten everything down. You of course, pull this out.

You would set it up so that it lines up to the opening in your pivot there and then screw that down it then slides down and as it slides down it squeezes those two pieces tight so that they clamp onto that and as they do, that they also since they’re, going down it’s bringing the base piece up against here and locking it down nice and tight so that it doesn’t want to move now.

The big thing that’s different about this model, then the previous model is this is actually carbon fiber. Now it’s going to be very difficult, I’m sure, for you, guys to see the actual texturing of the carbon fiber may be in the camera. Hopefully, hopefully we can get enough lighting on there. You can see at least a little bit of it. Now, of course, the carbon fiber is stronger and it is lighter than the previous model.

I can I mean picking it up. It’s so I can feel you know it’s ounces lighter than the previous model holding it just like this. So it’s definitely something that is going to make it easier to add to your to your rifle or long gun and keep it from making it overly heavy I mean, of course, a lot of a lot of rifles and long guns, especially if you have something like a wooden stock, they’re already really heavy and with a with adding on an additional piece, a bipod for example.

It’s definitely going to just make it that much more uncomfortable to carry all right now. I do have a another rifle. Actually, this is set up as a shotgun right now. This is a single shot that has a removable barrel and it does have the the same kind of pivot or what? What have you as as this does here, and so what we’re gonna do is I’m, going to go ahead and put that on here and we’re gonna set it and see if we can get it to mount to this, just to have a different, a different mounting point like I, said it’s the same kind of concept as mounting it to the pic rail adapter for the pic rail adapter.

Of course, you would just slide this open, make sure that it goes over top of and sits wherever you need it to be in the pic rail, using, of course, the bolt to set up into your little locking area and then just take and spin it down. So it’s nice and tight once you’re there, then you can go ahead and take your your bipod and clamp it to the the pin there and get it tightened up so that it sits on your pick rail, if that’s where you’re using it.

Alright, everybody! Well here we go. This is what it looks like on the gun on the rifle or well. This is set up as a shotgun right now, but there you go. It did locked down on there now the way this one’s set up its kind of small. This is a actually a youth model, one that’s good for backpacking, and things like that, where you can break it down and keep it into a small area, so the pin that’s, there is a little bit small, it’s very difficult to keep it on there, just because it’s not a full size, pin quite like this one, as this one’s just a little bit longer, has a little bit more room for movement and everything so but anyhow, so there we go, looks like that being set like that, and then, if we go ahead and flip the legs down here and there we go, we can of course set it like that and again you just take and tighten the thumbscrew here and that locks it into position there.

With this and a you know, pretty pretty simple and straightforward: it works fairly. Well, it’s it’s! On there, like I, said on this one, it’s not as secure as what it would be on. Maybe a full-size one. This little piece on the gun itself is a little bit loose and not quite right, but yeah. It’s not anything to do with the mount here. It’s actually with the pin and the way that it’s set in there I think if I were to maybe take and in a sense, knock off the front edge there and tighten that pin in a little bit more so that it was a little more secure.

This would set better. It’s just the fact that that pin on this on this gun isn’t really made to much as a swivel, it’s more of a locking mechanism to hold the grip onto the barrel, but it does work. The way it’s supposed to this is a great shooting position like this. You can, of course, take an angle up and down- and you know we can take in- let’s see we’ll extend these outs all the way and there you go.

You’ve got an nice, a nice high position there. You could, of course, be up on a on a Ridge or something like that and be taking your shot, maybe down the hill or something of that nature. If you guys want to check this out, you can go down there in the description below. We will, of course, have the link to the Amazon site in the page where this is at Forex agus also, while you’re down there don’t forget to check out our social media, and you know, leave a comment.

What do you guys think about this? It’s really nice, honestly, in my opinion, being so much lighter the fact that it is a carbon fiber very very for the most part, fairly simple use takes a little bit in maneuvering to get the the pins to line up there, but once they’re lined up it works great, you know it does it does its job and it’s you know it’s it’s ready to go so you know I I, definitely like it and, of course, once you’re done down there, don’t forget to head on back up hit that thumbs up button and also there’s going to be that little icon it’ll be floating down over there in the corner or you know, there’s gonna be that subscribe button down below.

If you guys haven’t already done it, please do so and I hit that little Bell icon so that you’re notified when we got new videos coming out here on world of me, alright guys well, my name is cougar. This is, of course, been another episode from the Amazon review series here on world of me. I would like to wish you all a good day and I will see you later bye.