The 13 Best Firearm Components – Sights reviews

This is Dan from Rock para cord today I’m gonna show. Is pro backup sites MB. You S stands for Magpul backup sites so. Ihave a rear size and a front sight here. These are fairly new they’re. All steel construction. And not the polymer plastic stuff just off of their website here. It says their case-hardened. And finished with a fare tick nitro carbonizing carburizing process for extreme resistance to wear. And corrosion so it seems like they’re they’re built pretty well the finish on them sounds like it’s pretty good. It mounts on mostly. All pica tinny rails. This is for the rear sight. When did you jest meant with low profile knob no tools required. It has positive detents in. And down positions standard AR site height. When deployed, so I’m hoping I have a yo tech on my m4 right. And I’m hoping these guys will Co witness with. You know cuz I have definitely run out of batteries before on my yo Tech.

And not had sights there was a time. Iwas shooting some tanner ite. Iended up wasting about 12 rounds trying to hit. One time I didn’t I had a dead battery on my EOTech so let’s open. These guys up so y’all can get. It closed up they come in pretty cool packaging with the window here see. Ican get it up alright. All right so pop those off look it’s a nice little Pirating rail there. All right so here it is up close. It is pretty tough you know feels built well so there’s the rear sight. It has the two different apertures there so that’s pretty cool. One just flops over top of the other. One okay let’s take a look at the front sight here same thing pretty sturdy will build here’s your elevation knob so no front side tool required there so that’s handy here. It looks like just a knob for wind age. All right so next I’m gonna go ahead.

And install these on my AR. And I’ll put that on video okay so. Now I’m here I’m gonna install. Iwas looking at how. Some pictures of how. These are put on it looks like the rear sight will go like. Idon’t know why but. Ikind of liked you guys see. This video let what y’all think why they put them. This way and not the other way, but we’ll go ahead. And put them on how. They say — gonna take off. This screw here slip. It on there I might slip. All the way to the end to get a nice long sight radius. That fits on their nice and tight. Even without the screw tightened down. All right that one’s on there. It fits almost perfect so maybe that’s why they have. That was but one thing I was thinking to the camera a little closer here is the little flip thing is on. This side so oh it seems like. It might work better.

It was flipped around so uh. What you think why they have. It flipped this way. It would also flip that way. Idon’t know maybe some people don’t have room with their optics okay. Now we’re gonna install the front sight. You look here on the bottom. This little bar right here will fit right into the first notch. And then my screw will fit there so. That slides on there. And fits nice and snug. And then you can screw. This through here so. You make sure it go the right way tighten. It down so now pretty much. All the way to the end here there. It is alright so at the front. And the rear sight setup here looks pretty good to. Now I’ll set you can see down the sights. We can see it misses oh so there. It is set up with the EOTech on seems to line up pretty good. Ihave the larger aperture open here a little bit better to video there.

In waiting a while for the Magpul mi bus pro sites for the ar-15 been using the gen 2 em bus standard sites for a. While the polymer sites so. Iwas really excited. That Magpul is offered a line of metal site a Nimbus stands for Magpul backup sites compared to the gym two M bus sites. You can see that there is definitely o’the big size difference. When the site is in the down position is going to be a lot. Lower profile a much smaller footprint. All the way around the mbus pros are 34 ounces. While the gen 2 m bus is 25 ounces so you’re going to have about an ounce difference in weight Magpul is started working in metals going from the polymer course retaining their polymer line. These are really exceptional they’re case-hardened. They have a Mennonite finish which is actually a nitro carburizing finish a lot of guns slides are nitro carburized. It actually surfaces hardens the metal they’re very corrosion resistant as well. One of the big things about metal sites is. You can put these on a gas block. You can’t with the polymer mbus sites. They will melt over time. Now I’m going to install the M bus pro sites on. This rifle one of the Odin works key mod rail systems which would go perfect with.

These sites we’re going to install the rear side first. You want to go ahead. And loosen up your screw I’ll put. It at the fatherís slide to get. It back here close to my at the end of my receiver goodness a cure fit is enough tension on there to. Where it’s not too tough to pull up but it’s not going to end. It vertically go back five. Is the longest sight radius possible we’re going to put at the very end of the rail system. These sites are rock solid. And of course the positive click is very reassuring there’s. Some detents in there to hold. This into place it’s got a really mean to pop. That down but the unique feature about the Magpul sites is.

This is a tooless adjustment so with. Most of your front sights you’re going to need to have an adjustment tool with. This little dial right here. You can dial and change your elevation it’s not super easy to do which makes. It really great it keeps. More secure the rear sight has a knob right here to be able to adjust your wind age. Now on the rear sight with. These together it’s a target site. And then you want more of a close quarter open site just pop the lever down with. It up it’s going to give. You a smaller aperture bringing it down is going to give. You a larger aperture. Now here side by side. You can see a major difference on the rifle here the Magpul pros. And then your standard mbus polymer sights so. These are much lower profile standing up it’s also a big difference. And of course here it is from the rear.

Ilike the standard Magpul in buss sights the pros definitely make a smaller footprint oh yeah. Ithink we’re ready to go out to the range I’ve been running the standard mbus sites for a long time. Ireally like them they’re very durable. They hold up really well but. Many prefer the metal sites. And a lot of sites that are out there are aluminum cast aluminum so. These are actually going to be steel they’re going to hold up. Even better than your aluminum sites. And obviously your polymer sites but. Ithink really if you’re looking for just. Some good backup sites the standard mbus gen two sites are excellent but. You really want to go a step above the pro-am bus is the way to go the mbus pros will run.

You about for the set about a hundred. And ninety dollars on the Magpul website for the regular standard polymer gin two sites. They run just under a hundred dollars for the set. You can buy them individually. You can buy mismatched pair. You can check out the M bus Pro. All the Matco products on Magpul com be strong be of good courage god bless america long live the Republic. You there is definitely oath big size difference it’s definitely going to be a lot. Lower profile definitely a much greater difference definitely smaller on your rail definitely a much smaller footprint. All the way around now magpul is deaf.

Hello YouTube Plains prepper here today we’re going to be going over the Magpul M bus pro rear flip up site. This is mag pulls all steel flip up option let. Me get the camera moved in a little closer here. And I’ll go over some of the things. And don’t like about. You can see here it’s very well constructed I’m like. Most things from Magpul the exceptional there aka mags. And for the most part. Ireally like it’s holding its held up good. It holds 0 really well there’s a. Few things I don’t like about. One thing being this doesn’t actually lock up so. You were like snagging up piece of gear it’ll flip right down. Iprefer the time they have a little detent here. That locks in the out position like a Midwest industries site would the other thing I don’t like. Idon’t like you change apertures. It just seems like I got thumbnail to get to. Iwas wearing gloves. Or in a hurry it’s a really fine motor movement the reverse side of. This is you flip. This down it doesn’t potentially change your zero like a standard sight would.

Idon’t know how much. That would actually knock your zero off I’m. Ijust know a buddy of mine mentioned. We were discussing this site those are really the only two things. Idon’t like about everything else it’s very well constructed it’s its actually steel. Where a lot of the rear sights on the market today. That aren’t polymer are aluminum. Ihear good things about the aluminum. One so maybe you don’t need to steel but. It is nice to know this is also is quite streamlined with the receivers so there’s. Nothing in your way right here it’s worked well I’ve got. This rifle generally has my comp m2 on. It off so you could see a little better. It co witness is just fine. Everything works just fine with.

If you’re looking for a rear flip up site. This was actually the nice thing too is a little. More affordable some of the aluminum offerings from Midwest industries. Or from Troy or white. Anybody like this ain’t got. One for around 86 bucks so. You do a little bit of money said there’s just a. Few caveats which is they don’t bother. You then go ahead this rear sight. You found this video informative please like share. And subscribe I will see. You in the next video.

Hey Fields Flyers are back again. This time talking about the dead ringer killer combo set. And mossy oak duck blind camo. This comes with one duck Buster. One beard buster both of which have adjustable rear sights. They fit all quarter inch 5/16. And 3/8 ribbed shotguns. Igot to tell you they’re great in low-light. Anyone who’s been turkey. Or duck hunting will tell. You earlier start the better but my favorite thing about. These things are the durability the base itself is actually made of a t6 aircraft grade aluminum. And the light pole is made of lexan which is 10 times stronger. That crummy fiber optic stuff the other guys use the best thing about. Though is how easy. It is to install there’s no 12 page booklet. We put in 16 languages telling you. What an Allen wrench does. All 10 steps are right here on the back alright there’s actually 11 steps but. One is telling you should have your shotgun pointed in a safe direction. And unloaded do you need. That right now for you might not be the product view the dead ringer killer combo set available today at Fields apply calm.

Hey Fields Flyers are back again. This time talking about the dead ringer killer combo set. And mossy oak duck blind camo. This comes with one duck Buster. One beard buster both of which have adjustable rear sights. They fit all quarter inch 5/16. And 3/8 ribbed shotguns. Igot to tell you they’re great in low-light. Anyone who’s been turkey. Or duck hunting will tell. You earlier start the better but my favorite thing about. These things are the durability the base itself is actually made of a t6 aircraft grade aluminum. And the light pole is made of lexan which is 10 times stronger. That crummy fiber optic stuff the other guys use the best thing about. Though is how easy. It is to install there’s no 12 page booklet. We put in 16 languages telling you. What an Allen wrench does. All 10 steps are right here on the back alright there’s actually 11 steps but. One is telling you should have your shotgun pointed in a safe direction. And unloaded do you need. That right now for you might not be the product view the dead ringer killer combo set available today at Fields apply calm.

Delta series is several products. That are designed for gunsmithing specifically on ar-15 platform guns with the popularity of the ar-15 s there’s been a lot of demand in the market for tools. And ways to work on the guns so the. One in my hand here is the ar-15 mag well vise block unique product set up to go inside the mag well of Nea are lower locks in place they’re adjustable. And angles so you’re able to work on your lower pretty much. Any angle you want the vise block can mount inside of our Tipton gun vise along the aluminum channel. It can bolt down on top of a bench top there a couple of the neat features in. One is a built in hammer stop so. You can rotate the hammer stop into position works great for tuning a trigger installing a new trigger. It stops the hammer from contacting the frame. You drive fire one other unique feature on the side of the product here there’s a bolt maintenance area so. You can actually engage the bolt lock. It into place there. And then take out your extractor pin. And service your bolt really convenient product works great for any your ar-15 needs. One of the other items in the Delta series line is our new combo tool it’s a great tool for just. Any different function. You have to perform on your ar-15 removing or installing barrel nuts flash hiders stock not on a CA out.

One unique feature this product has we’ve got an integrated bit holder that’ll hold the screwdriver bits. And then a bit driver so it’s a. Few extra tools gives. You a little bit of functionality in the field there also has a 3/8 inch drive adapter for a torque wrench so. We also offer it in a kit with. This beam-style torque wrench so. You can really calibrate. That barrel nut to the proper torque for maximum accuracy. One of the other products is the noob. They are 15 bore guide. You install it into the upper. You can close your dust cover. It engages into a machined ring here locking it in place to hold.

It tight and secure inside your upper. You can rotate it to a ramp tere. And pop the dust cover open. And remove it we’ve got the four guides available in. Both an ar-15 and AR ten configurations. Another great tool is our a our upper vise block. This device is designed to hold your upper securely in a vise for changing or installing a barrel locks down securely also comes with an insert. That goes inside of the upper. This also has a gas tube alignment range so. It makes it a lot easier as. You tighten your barrel nut to be able to make sure you’ve got. It properly aligned for your gas tube clearance be sure. And check out our website at BTI brands comm for more information on the wheeler delta series. All the other products.

Welcome to my channel. We talk about guns gear bush craft. And hunting today reviewing the Magpul. And bust pro offset sights. These are great backup iron sights to complement your primary magnified optic. If your primary optic were to go down. You encounter a close-range target simply rotate the rifle 45 degrees to use the iron sights the sights are made of durable melon itíd steel with positive detent lock up. When deployed you can easily zero. These sites with tool less adjustments for. Both wind age and elevation the low-profile design makes. This compatible with. Most rifle configurations the sights sit at the standard height over bore for the AR platform to position the sights on your rail you’ll need a 760 fourths inch hex wrench be careful not to over tighten as. You can damage the sights. You do so the wind age adjustment can be made on the rear sight to adjust left/right point of impact use the wind age adjustment knob on the right side of the rear sight turn the knob clockwise to move the PIO eye to the right turn the knob in the reverse direction to move the py to the left. Each click adjusts the PIO eye 9/16 of an inch at 100 meters for a typical m4 carbine your results may vary depending on the weapon. And rail position of your sights ie the sight radius elevation adjustments can be made with the front sight to adjust up/down point of impact use the elevation adjustment knob in the middle of the sight arm turn the knob in the direction indicated to move the PIO eye up turn knob in the reverse direction to move pio eye down make sure the knob is fully seated.

And not in between positions. Each click adjusts the point of impact. One in 1/8 inches at a hundred meters for a typical m4 carbine the rear sight features an aperture toggle for low-light. Or close range target engagement to return to using the smaller aperture simply flip the toggle back up. Both sights pop down for easy transport. And storage both sites take up minimal real estate on your Pirating rail. Iwas able to put my rear sight on the last pica tiny rail slot. It didn’t interfere with my charging handle similarly. Iwas able to put the front sight on my first Pirating rail. And easily clear the mounted light. Ihave as of January 2015 the rear sight retails at about a hundred. And five dollars the front at eighty-five making the set. One hundred and ninety total street price. What I’m seeing right. Now is about a hundred. And sixty dollars and there’s a lot of aftermarket options for offset.

Or cannon sites all across the price spectrum the Magpul sights are high quality in the neighborhood of. All the other high-end sights like the griffon armament fail-safe sights but there’s as well. Many low-end sights available like. This pair as well a. Few months ago I tested. This pair during competition. Iwas pleased with the concept but the quality wasn’t exactly up to my standards so. Iwas in the market for a pair. And just kind of about biding my time. Isaw the Magpul release. Ihad to test them out I’ve considered using an offset rail mount with a red dot but after a lot of consideration. Idetermined I really didn’t want my backup sights to be battery-powered but. Icouldn’t be more happy with the Magpul offset sights. Irecommend them to. Anyone writing to add a proven backup sighting system to their AR platform that’s. It for this video guys.

You enjoyed it as always stay safe. This is no more up for I’m out please be sure to rate. And comment on the video. You just beautiful for more videos on guns gear bush craft. And hunting subscribe by clicking the channel icon. You can also see a link to my last video as well as to my other social media make sure to LIKE no. More opt for on Facebook follow. Me on Instagram and see detailed posts on my blog thanks for subscribing to know. More opt for his YouTube channel.

The Magpul AR15/M16 MBUS Pro Offset Sights build upon the proven MBUS Pro Platform by delivering an effective supplemental aiming system to accompany magnified optics These easy-to-mount pica tinny sights offer a fully capable backup sight solution in the event of a damaged optic. Or close range target The rear sight offers tool-less wind age adjustments. And dual rear apertures. While the front sight features tool-less adjustment of the front sight post for easy zeroing The sights are made from melonited steel. And feature a positive detent lockup. When they’re deployed Like. All products sold by Brown ells the Magpul AR15/M16 MBUS Pro Offset Sights are backed by our 100% unconditional forever satisfaction guarantee.

That is hard even with. These it’s hard hey thanks for tuning in at wagon bang. That was my really bad recreation of a stage. And a three gun match. Iread about a number of years ago. Idon’t know why you don’t see. Because it’s really cool at the buzzer a shooter would run up to a barricade. And would have to engage 4-inch steel plates. And there were a lot of them out 200 yards. And farther so those with higher magnification we’re doing a little bit better about getting them knocked down under time but at. Some random time in the beginning of. That stage an e-type robotic target would pop up at about 15 yards. You wouldn’t know it was going to pop up so. You had to keep your attention divided between the targets. That were out far and scanning for where. That e-type was. Because as the other thing is. You didn’t know and every competitor was sworn to secrecy. Because there are a bunches of things. That could have been hiding it. All along so that e type would pop up. And you’d have I think there’re three seconds to shoot. It before it would drop back down. That was a kind of stage. Where having something like offset iron sight would be a real advantage versus having to switch your magnification on say a. One to eight power scope.

And it’s that kind of thing. That has made offset iron sights so popular. That Magpul decided to offer their own. And that’s what’s coming up next on twang. And bang the Magpul embas pro offset sites are Pirating mounted steel sights offset 45 degrees from the mounted rail melon tight finish. And hardened they allow. You to quickly acquire a backup sight picture without having to first remove your primary optic spring d-10 s hold the sights in. Either the closed or open position. This makes deployment quick. And easy while protecting them from damage from impact the rear sight is clique adjustable for wind age via a low snag knob witness marks on the site mean.

You don’t have to count clicks to return the site to 0 after dialing in wind age for a particular shot like the standard M bus pro sights the aperture is flip adjustable. And is surrounded by serrations to reduce glare the site can be stored with. Either aperture selected. Though like with most other sights like. This the small aperture will stick up. When the large aperture is selected the front sight is also clicked adjustable for elevation via a nested barrel the adjustment is clearly labeled indicating which direction to twist the barrel for the desired change in the point of impact. You might notice that the base of the front sight is actually the same as the rear which is why the witness marks are present.

This is a clever way to reduce manufacturing costs the mount portion of the sights is less. Then 1/4 inch high and takes up less. Than 2 slots on your rail. They fit with optics. That wouldn’t otherwise allow conventional backup sights like with the vortex Viper PST on my Iraq 21. Though the embassy offset sights give a standard height over bore for air 15 height top rails. They are still quite usable on non standard height rails as long as you’re willing to shoot them with a little. More Kentucky wind age at close ranges the rear sight is designed for mil spec uppers. And charging handles. And like all offset sights. You might find some clearance issues with parts. That vary from that norm. When folded the rear sight can interfere with. Some ambi charging handles. Istill have no problems actuated. This a XTS Raptor or my BC M&E; charging handle. Some uppers with forward assist. That vary from mil spec will definitely create a mounting issue. This old-timer does keep the site from seating fully on the rail.

And the contact is not. Something I would want on a hard use rifle. Iwas still able to get the pro offsets the site in. Ionly use or for the occasional ammo test. Or hunting this is not an issue unique to the Magpul sights in. Any way but something. That must be considered before purchasing them. You think you’re going to be able to just slap. These on a rifle and then go to town you’re going to have a bad time. That goes with any offset back at my our sites you’re going to deal with. Because there really isn’t. Any natural point of reference for you to feel. When you’re you need to stop so. That your eye falls right behind the sights you’re going to find.

That you’re going to be searching for them the first couple times out. That you’re using them. And you’re just going to have to run drills like. This switching from your magnified optic to your offset backup iron sights until. You start to develop. Some muscle memory that’s the only way you’re going to be quick with them of course. If you’re using them for something like hunting that’s not going to matter so much but. If you’re using them for 3-gun. If you’re putting them on an actual fighting rifle then you’re going to want to spend a lot of range time getting used to making. That transition there are number of reasons why in real life you’re not going to want to stick your rifle through a slot like. This to engage targets but in competition the targets aren’t looking for you they’re not going to shoot back. And you’ve got zero risk of coming up on a barricade that’s actually hiding a bad guy on the other side which is why in competition a lot of people like to use the bottom edge of the slots for support.

When shooting if you’re going to use the Magpul offset backup iron sights you’re going to need to adjust your tactics. Or at least pay attention to them. If you’re in a hurry. You shove your rifle through a slot like. You can knock the front sight down that’s why actually. If you’re building a strictly race gun which. Irealize that’s a really small percentage of people. That would be even watching this video but. Iwould for myself I’d pick a rigid solution. Because then you don’t have to worry about. That but that’s not. What Magpul made these sites for their practical tactical. You will which is why it makes perfect sense to. They work the way I was showing me so a friend of mine the other day.

One of the things he noticed. He really liked is the fact. These are designed to be adjustable in the field it’s actually kind of difficult to do. It does have a knob for wind age. And elevation, but they aren’t easy to turn which means. That you’re going to have to take. Some time some effort to get them adjusted you’re but you’re not going to need a tool to do. You could do it anywhere. You get gone making your adjustments there’s no way. They are going to get bumped out of place, so I’m out here in. This missing rain I want to illustrate. What I think should be the. Most popular use of offset iron sights like. These from Magpul 12 years ago. Iwas hunting in Granville County North Carolina on a piece of private property.

Iwas spot stalking deer that’s. Igot about half the deer I’ve hunted. Ihad already spent the morning in my tree stand. Nothing was moving it was a really weird weather day. It was misting and raining like. It was about 20 degrees warmer so that’s uncommon. Even by North Carolina standards in November. Iwas walking it must have been about an hour into walking I come up onto a pole line which. Iknew had deer beds. Ifrequently would jump deer from there. And sure enough I look in the grass. Ican see the biggest rack. Ihad ever seen during hunting when. Ihad a weapon in my hand. It was a big Granville County 10-point buck. He was looking away from. Because turns out I was coming in upwind from him so.

We couldn’t see I knew he’s going to smell. Iraised my rifle which was the 700 look through the scope. And there was nothing I couldn’t see. Anything it wasn’t just missed. It was fogged over from the really weird weather. All fog on the outside there was. Nothing wrong with the scope but. Ididn’t have a lot of time. Iknew he’s going to smell. Me soon enough I had a glove. Itried to wipe the mist off of the ocular lens the fog off the ocular lens. Iput the rifle back up just as the buck stood up. He was a little squirrely. Istill could only see shadows I’m not the kind of hunter that’s just going to start launching bullets at a deer hoping. Ihad to let the buck walk off. Itried to find him again well. Some time cleaning on my scope. Inever found him that day but. Iwere hunting with an ar-15 which was. These days there are a lot of great hunting platforms like.

This 300 blackout perfect for deer North Carolina. Iwould have had the same thing happen. Icould have just rolled over to my Magpul offset iron sights. And drilled them right there. He would end up in my freezer. And on my wall it was a beautiful buck. More people start hunting with ar-15 platforms with a top rail as it’s happening because of the great caliber choices. Now have they should be doing offset iron sights like. These from Magpul so. They have the option. Ididn’t have that day 12 years ago Mack will set the MSRP of the Pro offsets at exactly the same price as a standard mbus Pros. And that’s one hundred ninety dollars for a set but just today. Ifound them on sale at a major reputable online retailer for a hundred. And thirty-five dollars for the set. That is a steal for what you get. You get tooless adjust ability.

You get steel construction with melon. Itreatment they just work exactly as advertised. Ireally do think hunters are missing out. You aren’t hunting with an ar-15 platform especially. You aren’t hunting with. Some offset backup iron sights. Ican’t think of a better set to get then. These Magpul and buss pros. You want to learn more about them be sure to click the link in the video description below be sure to check out my facebook page at FB calm for slashed Wong. And Bank net that spelled out do Tian et. You can leave your questions. And comments there or below here on the view page. And be sure to click right here to subscribe so. You can catch my next videos on Bo’s guns. And other cool stuff. Ireally appreciate. You watch twanging a bang. Ihope to see you next time.

Everybody how’s it going into daily shooter. And today we’re going to be putting backup sights on the project SPR ar-15 build. Now earlier today I posted a video about. This particular scope right here in the vortex Diamondback 4 to 16 power scope but. We need to add some backup sights so the backup sights. Idecided to go with since. This is going to be a dedicated magnified optic RT Magpul. And buss pro offset sights so. These are really nice metal offset sights. That are going to sit really nice and flush. And low-profile to the firearm so. You don’t really notice. These are there until. You want to notice these are there. You flip these things up. And engage them and they’re ready to go. This is a rock-solid mount, so we’re gonna go ahead we’re gonna put. These on today and I’ll talk to. You a little bit more about them. Because I’ve actually used. These in the past matter of fact I’ve used. These for about a year.

And a half I absolutely love them. They might be my favorite sights of. All flip-up sights everybody knows. That Magpul makes a really good product. You know a lot of their stuff is great but for the. Most part the Magpul em besides are polymer the embossed pearl sights which. They have standard steel sights those flip up. And down but they flip straight up. And down so you have. Something like a scope. And maybe you don’t have a quick-detach mount. Something that’s just blocking them then you’re not gonna be able to use them. You can get a tool something to get. That optic off and then. You can use your sights well in order to avoid. You have offset sites. Now offset sights are great. And they’ve been around for quite a. They actually came about because of competition shooters three gun shooters.

And a lot of these competition shooters. They wanted to transition very quickly from a site for close target purposes. And then back to their scope so in doing so. They came up with offset sights. And they’ve really kind of caught fire ever since it’s such a good idea. It really doesn’t make. Any sense not to have. These especially you have. Something like mine which has a dedicated magnified optic to. It so we’re gonna go ahead. And install these again. All steel construction. They take up a very small bit of your Pirating rail so. You worried about let’s say. Irelief you have to have your scope. All the way back this only takes up like. Ithink two rail sections total so your rail sections are going to suffer too much form.

This so let’s go ahead. And install them and I’ll show. You exactly what I’m talking about okay so here’s our rear sight. And like I said before. This thing takes up almost no rail space which is good. Ihave my optic here. You can see I only have two rail slots left. Idon’t want to move. This mount this is perfect for my eye relief. Everything set up so. Ionly have these two little slots right here which really isn’t. That much well thankfully the Mac bowl offset sites only take up two rail spaces so. They take up almost no space at. And they’re extremely low-profile not just low-profile to the gun but low-profile on the mounting part itself. It just takes a simple allen wrench to install.

And put these things on, so we’ll go ahead. And we’ll do it just kind of clamps onto the Pirating rail there’re no bolts. Anything that goes through so. You don’t have to match. It to the rail section as is. You just kind of make sure. That it’s forward you tighten. It clamps right on there to your rail section so. You can see right here extremely low-profile design. It takes up almost no space. Imean the amount of rail space is so minimal. You don’t even notice. And then you have again the very flush fit against the firearm itself. You can see right here. You have to do is just grab. It sorry taking a cut in the way the camera right there. You grab you flip it forwards. You can listen for an audible click. This thing comes up okay so. This thing actually does click into place. When it’s up it’s not going to go anywhere it’s not going to go down.

You forcefully push. And it’s not that hard but. You have to put force on it’s not going to go down just because of recoil. Anything else and then again. It clicks down okay. That clicks down and completely clicks down. And out-of-the-way now my circumstance there’s probably a lot of people. That are looking at the charging handle right here. And digging that oh that’s too close to the charging handle. This is an ambidextrous charging handle. Itend to use the left side I’m right-handed but. Iwanted to there’s actually still plenty of space for me to charge the firearm okay so. Ican do it doesn’t get in the way completely so. You can see what it looks like right here it’s a really nice to. This is our rear sight let’s go ahead.

And install a front sight okay so here’s our front sight. And our front sight is exactly the same as the rear. It takes up just as lower rail space it’s its just as low-profile. This is a great overall design it’s gonna sit really nice and flush to the firearm so let’s go ahead. And install this case on the front of the firearm right here it’s kind of got a larger section on the front of the Pirating rail so. This only takes up one rail space. You install it sits. All the way up with up at the front. And gives you the best sight radius possible so here I’m using a 15 inch hand guard. Ihave the other all the way to the back, so I’m getting a really nice sight radius.

When I’m using these which is going to help. Me make better shots better sight alignment for sure so. We just tighten this down. It clamps right on you can see. How nice that fits right there again extremely low profile. These up see right there again audible so take. These down halfway and listen for. That okay so they do click up. They click down as well so click down click up. These things aren’t going anywhere okay so that’s. It the rifle itself is complete I’m really happy with. It overall I have the Magpul M bus pearl offset sights. Ihave the vortex Diamondback HP. Ihave a lot of great parts from Midwest industries to Fortas to criterion phase five SLR rifles works.

Ireally like this iconic industries 80 percent lower. This thing was great the jig was pretty easy to use maybe not the easiest but still definitely doable by your average. You know at home guy. Everything about this is fantastic I’m very happy with absolutely. Everything so we’re gonna take. This out next do a little bit of shooting with. It a little bit of target practice will maybe extend. It out to four or five hundred yards maybe in six hundred yards just to see. And I’ll give you guys my report but so far can tell. You damn thing looks good. Iam really happy with. This rifle builds overall. Something you know. Iput a lot of time a lot of effort a lot of work into. And the guys at MSR Arms calm really stepped up to the plate on. You would go support them go to — MS our arms comm click on my logo for project SPR. You can use a code daily 10. Or excuse me TDS 10 to get 10% off of. All the parts that were used in. This build except for the optic itself so.

You can get 10% off of. That until november 1st 2016 after. You can use code TDS 5 to get 5% off so. What I wanted to tell. You guys give you guys a little bit of a discount maybe kind of help. You guys build your next rifle as well but definitely worth checking them out they’ve been a big help to my channel. They are a bunch of great guys over there at MSR arms so definitely check. It out anyway thank. All very much for watching this series please stick with. If you’re not a subscriber maybe you’ll think about subscribing and you’ll see. This rifle actually performs thank. All very much for watching please like subscribe. And have a great day.

Today I’m going to share with. You the g6 rifle laser sight. This is the green one from the ready fire series sight mark inside the box here we’ve got user manual. This is actually the laser right here pretty solid little unit push button on the back. It does come with detachable button. You can remove this cap put. It on the end this button. Wherever you want it does take the cr123a ‘s takes two of them pretty bright laser. You can see that there. We go so that’s pretty bright laser shines pretty good. All the way across wrong let’s come with them out. And I’m gonna mount. This on the bottom of my night vision upper. This would be a good close-range set up for hunting at night. Something in too close for the night vision. And got enough light to. Ican see it moving I’ll be able to put. This laser on that I’m going to mount. It right here on the bottom side. All right got the mount installed on. And pretty good a little mount there. And we’ll attach it again. These does have sight marks lifetime warranty my thoughts on the use of. This right here is I’ll be able see my cording patch I’ll be able to reach up with. One finger and turn. It on right like yeah not a head for the range on target. And I’m gonna adjust. That laser real close before. Even shoot it that’s got sites about an inch high on the target.

Igot the laser on the dot on the target we’re at 25 yards right. Ican see that dot playing this day 1/2 inch low. And 1/4 inch to the right. Ithink I’m gonna leave. It there I moved the coder into the ride should be pretty close at 50 It looks like a pretty tight little group right there for not looking through a scope. Anything just putting. That dot on there and putting some bullets in. Ithink I’ll move it out to the 50-yard. And we’ll see it does there. We go that’s at 50 yards. You can see that green laser dot on there I’ll move. It around a little bit. Ican see the green contrast on the orange from here. It is sitting in the shade kind of partially sunny overcast kind of comes. And goes but I can still see. That dot pretty good go ahead.

And take a few shots at 50 yards see. Ijust want to make sure. You guys can see that I’m using. That laser and not the scope. Iknow the scope song I’m gonna try. This laser out it dead center on. That black dot that’s. Igot pretty good eyes that’s a long that’s pretty good distance so. It looks like I shot about four inches no well. Ishot about three inches low of the dot so. Ithink I’ll try to raise. That up I’m hoping this works we’re going to put the dot back on the target. And just lower it down to my point of impact. Ithink that’ll put. Me on target at 50 yards All right so those five shots at 50 yards. It looks like they’re. All right underneath the center of. That target so that dead-on at 50 so. Igot my AR set up in my tripod. This is my usual coyote setup I’ve got.

Some clays down here we’re at 25 yards it’s kind of hard to see let’s say. This little site right here laser sight it’s quite good it’s very accurate it’s been staying on shop cut quite a. Few rounds a little fast. It would be very good very useful at night. You pull it off your setup close range it’s gonna work real good. Any farther than 50 yards. And in the daytime I don’t think you’re gonna be able to see. That dot very well at. All but at night you could. You could probably get out to 100 yards but that’s. Where the scope comes in also very good sight it’s its solid on there’s no movement in. Icould just reach up our.

It does have the remote button which. Icould put on there but. Ikind of like just being able to reach up push. That button right there.